Equipment Safety · 2–5 min toolbox talk
Boom Lift Safety
A safety talk addressing safe use of boom lifts for elevated work, including fall protection, travel hazards, and overhead risks.
Use this printed script for your tailgate or toolbox talk. Read through the hazards, script, and questions with your crew.
Scan to open online
“Boom Lift Safety”
Key Hazards
- Falls from the basket due to improper tie-off or movement
- Tip-over incidents from poor setup or terrain conditions
- Contact with power lines and overhead hazards
2–3 Minute Talk Script
Boom lift safety is essential because booms can move in multiple directions and place workers near overhead hazards. Sudden movement or improper tie-off can cause falls or ejection from the basket.
Inspect the lift before use and confirm work area conditions. Ground stability, slope, and surface conditions matter. Keep the lift within safe operating limits and avoid unsafe travel with the boom elevated unless permitted by the manufacturer.
Use required fall protection and connect to the designated anchor point in the basket. Never tie off to nearby structures or guardrails.
Maintain safe clearance from power lines and overhead equipment. If visibility is limited, use a spotter and establish clear communication.
Safety Reminders
- Wear and properly connect fall protection to the basket anchor point.
- Inspect the lift and verify ground conditions.
- Maintain safe clearance from power lines.
- Use spotters and clear communication when needed.
Ask the Crew
- Are we using fall protection correctly and tied to the proper anchor?
- Have overhead hazards and power lines been identified and controlled?