Rigging and Lifting · 2–5 min toolbox talk
Safe Use of Lifting Slings
A safety talk focused on lifting sling hazards, including sling ratings, inspection, sharp edges, load control, sling angles, suspended loads, and proper storage.
Use this printed script for your tailgate or toolbox talk. Read through the hazards, script, and questions with your crew.
Scan to open online
“Safe Use of Lifting Slings”
Key Hazards
- Sling failure from damage, overload, or improper use
- Loads falling, shifting, or swinging during lifting
- Cuts or abrasion from sharp load edges
- Incorrect sling angle reducing capacity
- Workers standing under or near suspended loads
- Using the wrong sling type for the load or environment
2–3 Minute Talk Script
Lifting slings are critical rigging components. If a sling fails or is used incorrectly, the load can fall suddenly and seriously injure workers.
Workers should inspect slings before use. Cuts, burns, broken wires, crushed areas, fraying, chemical damage, missing tags, damaged stitching, or deformation should be taken seriously.
The sling must be rated for the load, hitch type, angle, and lifting environment. Capacity changes based on how the sling is used.
Sharp edges can damage slings quickly. Edge protection, padding, corner protectors, or different rigging may be required.
The load should be balanced and controlled before lifting. Workers should know the center of gravity and how the load may shift.
Workers should stay out from under suspended loads and away from the load path. Taglines may be needed to control rotation or swing.
Slings should not be knotted, shortened improperly, dragged under loads, or used if the identification tag is missing or unreadable.
Safe lifting sling use depends on inspection, correct selection, proper hitching, edge protection, clear communication, and keeping people out of the drop zone.
Safety Reminders
- Inspect slings before every lift.
- Do not use damaged or unidentified slings.
- Confirm sling capacity for the load and hitch.
- Use edge protection on sharp corners.
- Keep workers out from under suspended loads.
- Control load swing with communication or taglines.
- Store slings to prevent damage.
Ask the Crew
- Is the sling in safe condition?
- Is the sling rated for the load, angle, and hitch?
- Are sharp edges protected?
- Is the load balanced and controlled?
- Are workers clear of the suspended load and drop zone?