Small Boat Operations Safety Basics

Key Hazards

• Untrained or unauthorized personnel operating the boat
• Falls overboard, drowning, or cold-water exposure
• Collisions with vessels, structures, shorelines, or submerged hazards
• Changing weather, wind, current, waves, or visibility
• Loose equipment, poor load distribution, or overloaded vessels
• Delayed emergency response because communication or rescue equipment is unavailable

2–3 Minute Talk Script

Small boats are used for inspections, sampling, maintenance, surveying, emergency response, and other field work. The boat may be familiar, but the operating environment can change quickly and leave little time to correct a mistake.

Only trained, qualified, and authorized personnel should operate the boat. The operator should understand the vessel, controls, local waterway, company procedures, and the limits created by weather, current, visibility, and the work being performed.

A pre-departure check should be completed before the boat leaves the launch or dock. The crew should confirm that the hull, engine, steering, fuel, battery, drain plug, lines, required equipment, communication devices, and emergency supplies are ready for use.

Each person should have a properly fitted personal flotation device appropriate for the task and conditions. Workplace requirements may call for the device to be worn continuously, especially while boarding, working on deck, operating near moving water, or performing tasks that affect balance.

The operator should control passenger location and movement. Sudden standing, leaning over the side, changing seats, or shifting heavy equipment can affect stability and create a fall-overboard or capsizing hazard.

A safe route should account for water depth, current, boat traffic, restricted areas, bridges, dams, intake structures, debris, submerged objects, and commercial vessels. The crew should not rely only on a phone, chart display, or previous experience.

Emergency responsibilities should be discussed before departure. The crew should know how to stop the boat, call for help, deploy flotation or rescue equipment, respond to a person overboard, and manage a disabled vessel without creating a second emergency.

Safe small-boat work depends on preparation, qualified operation, controlled movement, proper flotation, conservative decisions, and a willingness to cancel or stop the mission when conditions exceed the crew or vessel's safe limits.

Safety Reminders

• Use only trained and authorized boat operators.
• Complete a pre-departure check before leaving shore.
• Wear the required personal flotation device properly.
• Keep passengers seated or positioned as directed by the operator.
• Monitor weather, current, traffic, and visibility throughout the mission.
• Keep communication and emergency equipment immediately accessible.
• Return to shore when conditions exceed safe operating limits.

Ask the Crew

• Who is the qualified operator for this mission?
• Has the boat and required equipment been checked?
• What weather, current, traffic, or route hazards are expected?
• Does everyone understand movement and seating expectations?
• What is the emergency plan if the boat becomes disabled or someone falls overboard?