Fire Safety · 2–5 min toolbox talk
Hot Work Permit Safety
A safety talk focused on safe planning and control of hot work activities such as welding, cutting, and grinding.
Use this printed script for your tailgate or toolbox talk. Read through the hazards, script, and questions with your crew.
Scan to open online
“Hot Work Permit Safety”
Key Hazards
- Fire from sparks or hot slag
- Ignition of hidden combustibles
- Lack of monitoring after hot work is completed
2–3 Minute Talk Script
Hot work permit safety is critical because sparks and heat can ignite fires long after work is finished. Many fires occur because hazards were not identified beforehand.
Hot work permits help ensure combustible materials are removed or protected and that fire prevention measures are in place.
Fire watches should be assigned when required and remain in place after hot work is completed to monitor for smoldering materials.
Workers must stop work immediately if conditions change or fire hazards cannot be controlled.
Safety Reminders
- Use hot work permits when required.
- Clear combustibles from the work area.
- Assign fire watch personnel as needed.
- Have fire extinguishers readily available.
Ask the Crew
- Has the hot work area been inspected and cleared?
- Is a fire watch required for this task?